Replica Bvlgari Jewlery production process

How hard is it to make a Replica Bvlgari Jewelry? Today I will give everyone decryption under the production of a Replica Bvlgari Jewelry production processes. Each process represents the spirit of craftsmanship, on behalf of the artisan jewelry perfect attitude.

first step:

The buyer of diamonds and precious stones for Replica Bvlgari jewelry buyers have a wealth of experience. Bvlgari selected diamonds, diamonds must be selected from more than 400 the most colorful and moving, consistent color, the highest quality can be used.

Step two:
When Bvlgari designers get specially selected rare and good quality gemstones, the gem will first look for a variety of design prototypes based on its own characteristics, such as shape, size, luminosity and so on. In the design of the effect of the color map, will be marked in detail the color and size, but also for many review, discussion and modification.
To vividly reflect the details of jewelry design, designers will first use green wax sculpture for each part of the model

third step:

In order to vividly reflect the details of the shape, the design sketch to soft wax or hard wax carving molding, can be specifically revealed volume. And then dig out the model holes in the gem mosaic, and then the model test gem placement, access to the best mosaic position, at the same time the model color, to feel the color arrangement of gemstones feel. Gems need to go through the perfect cut, arranged after the combination of photos, calculate the weight of gems, cutting, taking pictures, and then make a metal model to be melted, calculate the metal weight and other responsible procedures. To complete this step, can be considered the completion of the calculation steps, and to be reviewed by the chief designer to determine the final ideal style.
Skilled mosaic experts use exclusive techniques to secure gems to jewelry, converting from wax to metal

the fourth step:

Jade is not cut, not a device, there is no processing of diamonds and gemless as dull, only well-trained master accurate design, ingenuity carving in order to uncover the veil of diamonds and precious stones. The jeweler will find the best cut point by cutting the index of refraction and color calculation, to ensure that it emit the most perfect light.

Egg or small grains such as rice, are hand-inlaid completed, so this is a very time-consuming process, the jeweler’s test of the eyesight, power and ability to handle, because these precious stones, once the improper force, it may be in the mosaic process damage.

The fifth step, metal casting

With good ductility of silver material early embryos, help gem mosaic and inlaid caliper measurements. And then the actual completion of the metal to sit carving, carving inlaid holes. If the production of more complicated design, designers first try to make an important part of them to test the sense of touch and flu. Coupled with wax gem mold, inlaid mosaic design in the location, observe the color with the sex.

Step Six:

Mosaic method will vary according to different gemstones, including Chun inlaid, claw inlay, paving or inlaid mosaic. Whether it’s a big goose egg or a small grain like rice, it’s done by hand, so it’s a time-consuming process that tests the eyesight, power and ability of the jeweler because these precious gems, if improperly handled, may Damaged during the mounting process.

Step Seven:

The jeweler combines the various parts of the jewelery by fixing or articulating them so that the perfect dynamic jewelery leaps in sight. In addition to the specific form, designers will also be a variety of gemstones decorated to different jewelry, so that these jewelry more perfect.

The eighth step, polished and polished

Not only need to be polished in the jewelry surface and plating rhodium. In the details of the treatment, the cotton will be combined with special polishing agent, before and after the precious stones inlaid, multiple polishing process, with particular emphasis on the mosaic of holes in order to make inlaid gemstones the best shine and brightness. Finally, rhodium should be plated on the perfect finished product to prevent oxidation and keep the jewelry everlasting.

Step Nine:

Finally, each piece of Bvlgari luxury jewelry will be carved on the Bvlgari mark and number, marking the unique identity of this jewelry.
Jewelry designers from beginning to end will be accompanied by every step of gem production. They work closely with technicians to evaluate the quality of work and to scrutinize every detail and overall feel of the finished product. Each work, are the combination of jewelry craftsmen, precious stones inlay division, mold division polishing division cutters work together and effort.

Tagged , , , , , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>